Switch Type Multi-Turn Electric Actuator
1.Smaller and more precise, conducive to installation
2.More precise control and application
3.Basically no harsh noise during operation
4.More energy saving and environmental protection
5.Reduce the cost of the automated production industry
Every LORZEN Switch Type Multi-Turn Electric Actuator has gone through highly controlled conditions to ensure the high quality of your Electric Actuators.
Description
Switch Type Multi-Turn Electric Actuator is used to control the open and close of valves. It is applicable to gate valves, globe valves, shut-off valves, diaphragm valves, and its derivative products can be applied to ball valves, butterfly valves and dampers, etc. It can accurately operate according to control commands, which is essential driving device for remote control, centralized control and automatic control of valves.
Standard technical parameters
|
Function: |
On/off or modulating |
|
Housing: |
Aluminum alloy,epoxy powder coated |
|
Gear: |
Steel/aluminum bronze |
|
Screws: |
Stainless steel |
|
Indicator Cover: |
Polycarbonated |
|
Shaft/Adaptor: |
Alloy steel |
|
Seal: |
NBR |
|
Lubrication: |
Aluminum based grease |
|
Power Supply: |
24VDC,110VAC,220VAC |
|
Motor: |
Squirrel cage asynchronous motor |
|
Limit Switch |
SPDT,250VAC 10A,each for open and close positions |
|
Rotation: |
90° (±10°)other rotation on request |
|
Manual Operation: |
Mechanical handle standard |
|
Conduit Entry: |
2 x M18 |
|
Operating Temp: |
-20°C to + 70°C |
|
Ambient Humidity: |
Max.90%RH |
|
Vibration Tested: |
XYZ10g,0.2~34Hz,30 minutes |
|
Mounting: |
ISO5211 |
|
Torque Output: |
30Nm to 1000Nm (2000Nm on request) |
|
Self-locking device: |
Self-locking by worm and worm gear |
Performance Testing
Our state-of-the-art facilities allow rigorous testing to validate function, endurance and environmental protection.
Quality Assurance
100% testing and inspection ensures superior performance of every actuator.
LORZEN Electric Actuators Are Utilized Across Various Sectors, Including:
Actuator Design
Switch Type Multi-Turn Electric Actuator Application
Switch Type Multi-Turn Electric Actuator is used to control the open and close of valves. It is applicable to gate valves, globe valves, shut-off valves, diaphragm valves, and its derivative products can be applied to ball valves, butterfly valves and dampers, etc. It can accurately operate according to control commands, which is essential driving device for remote control, centralized control and automatic control of valves.
- +8613736966003
- [email protected]
- Lorzen Factory Park, Linyang Industrial District, Oubei Town, Yongjia County, Wenzhou City, Zhejiang Province, China
Switch Type Multi-Turn Electric Actuator Product structure
Intelligent Electric Actuators Product Features
Product introduction
Electric actuators are used to control valves and other similar products that rotate from 0° to 270°, such as butterfly valves, ball valves, dampers, flapper valves, plug valves, shutter valves, etc., and can be widely used in petroleum, chemical, water treatment, shipbuilding, papermaking , power station, heating, building automation, light industry and other industries. It uses 380V/220V/110V AC power as the driving power, and 4-20mA current signal or 0-10V DC voltage signal as the control signal, which can make the valve move to the desired position and realize its Double-linked cams are used to facilitat automatic control. The maximum output torque reaches 4000NM.
Product features
1.Location indication
The opening degree of the valve is displayed by plane pointer and scale, which takes up little space.
2.Terminal block
There are enough terminals to make it easy for the user to use and to ensure a tight, secure wire connection.
3.Terminal block
The long-term sealing ring design is adopted to effectively ensure the waterproof level.
4.Manual device
After the power is off, open the rubber protective cover and insert the matching Z-type wrench to manually open and close the valve
5.Connection flange
The bottom connection hole of the electric actuator is in accordance with the ISO5211 standard. There are two different sizes of double flanges and octagonal drive sleeves. The installation angle can be changed flexibly to achieve the purpose of flange connection with valves with different hole positions and angles.
6.Weather resistance
The shell is coated with anti-corrosion epoxy resin powder, which has strong adhesion and corrosion resistance. All fasteners are stainless steel for outdoor applications.
7.Safe operation
Class F insulated motor, the motor winding is equipped with a temperature control switch to sense the temperature of the motor, which can provide over-temperature protection and ensure the safe operation of the motor.
8.Appearance design
Patented streamlined appearance design, small size, light weight, suitable for applications in narrow spaces.
9.Limit function
Double-linked cams are used to facilitate the setting of stroke positions.
